Afterburners and inertial dampeners.
This Node allows you to change things such as Afterburner thrust, heat generation and energy drain, as well as dampening power and heat generation. It also contains the Chronodrive. See Mobility.
Currently contains a set of three primaries with different effects.
This node is largest in Fighters, and smaller everywhere else.
Primary Auxiliary Drive Edit
The primary auxiliary drive affects both afterburners and brakes. The mobility provided by afterburners is added to the mobility already being provided by the engine, but will drain energy and build up heat to match.
Afterburner thrust is the acceleration power that the auxiliary drive adds. Cruise speed is how the drive affects the ship's maximum speed. Afterburner drain and heat show how much energy is used and how much heat is added when the afterburners are active. Inertial dampening is the rate at which your brakes slow you down, and dampener heat is how much your brakes will increase heat when you're using them.
|Name||Equipment Tag||Slots||Afterburner Thrust||Cruise Speed||Afterburner Drain||Afterburner Heat|
|Basic Drive||AUX-2P||2||+0.61 kN||+106.67 m/s||+2.13 p/s||+4.27 p/s|
|Plasma Thruster||AUX-2P-MV||2||+0.5 kN||+87.22 m/s||+8.53 p/s|
|Inertial Stabilizer||AUX-2P-PA||2||+0.38 kN||+65.5 m/s||+2.13 p/s||+4.27 p/s|
|Persistent Drive||AUX-3P-PA||3||+0.59 kN||+103.03 m/s||+2.95 p/s||+5.90 p/s|
|Falcon Drive||AUX-4P-MV||4||+0.61 kN||+105.28 m/s||+1.90 p/s||+3.80 p/s|
|Mending Drive||AUX-5P-PA||5||+0.58 kN||+100.00 m/s||+4.67 p/s||+9.33 p/s|
|Name||Inertial Dampening||Dampener Heat||Ability|
|Basic Drive||+0.44 kN||+9.6 p/s|
|Plasma Thruster||+0.36 kN||+9.6 p/s||Plasma Thruster|
|Inertial Stabilizer||+0.96 kN||+12.8 p/s||Inertial Plating|
|Persistent Drive||+0.43 kN||+13.27 p/s||Persistence|
|Falcon Drive||+0.44 kN||+11.39 p/s||Falcon Dive|
|Mending Drive||+0.42 kN||+21 p/s||Mending Drive|
Additional Auxiliary Drive PartsEdit
Once the primary auxiliary drive is equipped, you can further increase its performance by equipping parts. Unique-type parts can be equipped once, while Component-type parts can be equipped any number of times. Each part uses one slot.
|Name||Equipment Tag||Afterburner Drain||Afterburner Heat||Inertial Dampening||Dampener Heat||Ability|
|All Stop System||AUX-1U-MV||All Stop|
|Thermal Dampening Module||AUX-1U||+0.21 kN||+1.00 p/s|
|Dampener Optimizer||AUX-1U||+0.11 kN||-0.40 p/s|
|Afterburner Efficiency Module||AUX-1U||-2.67 p/s|
|Afterburner Cooling Module||AUX-1U||-5.33 p/s|
|Name||Equipment Tag||Afterburner Thrust||Afterburner Drain||Afterburner Heat|
|Thermal Afterburner Thrust Module||AUX-1C||+0.32 kN||+3.56 p/s|
|Overthrust Module||AUX-1C||+0.45 kN||+3.56 p/s||+1.78 p/s|
|Charged Afterburner Thrust Module||AUX-1C||+0.32 kN||+1.78 p/s|
|Afterburner Thrust Module||AUX-1C||+0.32 kN||+1.78 p/s||+0.89 p/s|